Mpls Te Path Explicit-Path; Mpls Te Path Metric-Type - H3C MSR 20-20 Command Reference Manual

1628 C 96: MPLS TE C
HAPTER

mpls te path explicit-path

Syntax
View
Parameter
Description
Example

mpls te path metric-type

Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION OMMANDS
mpls te path explicit-path pathname
undo mpls te path
Tunnel interface view
pathname: Name of an MPLS-TE explicit path, a string of 1 to 31 characters.
Use the
mpls te path explicit-path
the tunnel.
Use the
undo mpls te path
# Configure interface Tunnel0 to use the explicit path named path1.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] mpls te path explicit-path path1
mpls te path metric-type { igp | te }
undo mpls te path metric-type
MPLS view, tunnel interface view
igp: Uses IGP metric for tunnel routing.
te: Uses TE metric for tunnel routing.
Use the
mpls te path metric-type
metric type used for routing tunnels not configured with link metric type.
Use the mpls te path metric-type
the link metric type used for routing current tunnel.
Use the
undo mpls te path metric-type
undo form is only available in tunnel interface view.
By default, TE metrics of links are used in path calculation for TE tunnels.
mpls te metric.
In MPLS view:
command to associate an explicit path with
command to remove the association.
command in MPLS view to specify the link
command in tunnel interface view to specify
command to restore the default. This