Display Mpls Ldp Peer - H3C MSR 20-20 Command Reference Manual

1522 C 95: MPLS B
HAPTER
Related command:
Example

display mpls ldp peer

Syntax
View
Parameter
C C
ASICS ONFIGURATION OMMANDS
display mpls ldp.
# Display information about all LSPs established by LDP.
<Sysname> display mpls ldp lsp
--------------------------------------------------------------------------
SN DestAddress/Mask
-------------------------------------------------------------------------- 1
1.1.1.1/32
2 10.1.1.0/24
*3 100.1.1.1/32
-------------------------------------------------------------------------- A
'*' before an LSP means the LSP is not established
A '*' before a Label means the USCB or DSCB is stale
Table 373 Description on the fields of the display mpls ldp lsp command
Field
SN
DestAddress/Mask
In/OutLabel
Next-Hop
In/Out-Interface
display mpls ldp peer [ peer-id ] [ vpn-instance vpn-instance-name [ verbose ]
[ peer-id ] ] [ | { begin | exclude | include } regular-expression ]
display mpls ldp peer [ all ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
Any view
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31
characters.
peer-id: LSR ID of the peer.
verbose: Displays detailed information.
|: Filters the output information.
begin: Begins with the specified string.
include: Includes the specified string.
exclude: Excludes the specified string.
regular-expression: Regular expression, a string of 1 to 80 characters. No blank
space is acceptable.
LDP LSP Information
In/OutLabel Next-Hop
3/NULL 127.0.0.1
3/NULL 10.1.1.1
Liberal (1025)
Description
Sequence number of the LSP. A "*" before an SN means that the
LSP is not established.
Destination address and the mask of the LSP
Incoming label/outgoing label. A "*" before an LSP means that the
LSP is in the GR process. Liberal (X) means that the LSP is not
available and the label value is X.
Address of the next hop
Incoming interface/outgoing interface
In/Out-Interface
Ser2/0/InL0
Ser2/0/Eth1/1