Debugging Bgp Event - H3C MSR 20-20 Command Reference Manual

1018 C 73: BGP D
HAPTER
Examples

debugging bgp event

Syntax
View
Default Level
Parameters
Description
C
EBUGGING OMMANDS
Table 224 Description on the fields of the debugging bgp detail command
Field
Received New VPNv4 Route with
Ext-Community NULL.Ignoring Route
Received VPNv4 Packet But No Such Route In
Loc Rib
operation XX
Receive SMB UP backup requirement
Receive routine backup requirement
Receive SMB down backup requirement
# Enable detailed debugging for BGP when a BGP peer relationship is being
established.
<Sysname> debugging bgp detail
*Aug 24 14:12:13:674 2006 Sysname RM/6/RMDEBUG:
BGP_L3VPN: Recv UPDATE with following RD 100:1 destination 11.1.1.1
- Received New VPNv4 Route with Ext-Community NULL..Ignoring Route
// BGP received an UPDATE message with RD 100:1, destination address 11.1.1.1.
The Ext-Community of the new VPNv4 route is NULL and therefore the route was
ignored.
DeLocRemCross: Deleting route From Target Instance.
// The route was deleted from the instance
debugging bgp [ ipv4-address | ipv6-address ] event
undo debugging bgp [ ipv4-address | ipv6-address ] event
User view
1: Monitor level
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.
Use the
debugging bgp event
Use the undo debugging bgp event
BGP.
Description
Received a new VPNv4 route with
Ext-Community as NULL and therefore
ignored the route.
Received a VPNv4 packet and there is no such
a route in the local routing table
Label operation code
Received a standby board startup event
requesting an active/standby switchover
Received a routine request for an
active/standby switchover
Received a standby board down event
requesting an active/standby switchover
command to enable event debugging for BGP.
command to disable event debugging for