Fast-Leave (Mld View) - H3C MSR 20-20 Command Reference Manual

1446 C 92: MLD C
HAPTER
Description
Example

fast-leave (MLD view)

Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION OMMANDS
Use the display mld routing-table
information.
# View the information of the MLD routing table.
<Sysname> display mld routing-table
Routing table
Total 1 entry
00001. (*, FF1E::101)
List of 1 downstream interface
Ethernet1/0 (FE80::200:5EFF:FE71:3800),
Table 353 Description on the fields of the display mld routing-table command
Field
00001
(*, FF1E::101)
List of 1 downstream interface
fast-leave [ group-policy acl6-number ]
undo fast-leave
MLD view
acl6-number: Number of a basic IPv6 ACL, in the range of 2000 to 2999.
Use the
fast-leave
Use the
undo fast-leave
By default, the fast-leave feature is disabled, that is, the MLD querier sends a
multicast-address-specific query upon receiving an MLD done message from a
host, instead of sending a leave notification directly to the upstream.
mld fast-leave and last-listener-query-interval.
n
This command takes effect on all Layer 3 interfaces when executed in MLD view.
# Enable the fast-leave function for IPv6 multicast group members globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] fast-leave
command to view the MLD routing table
Protocol: MLD
Description
Sequence number this (*, G) entry
A (*, G) entry in the MLD routing table
List of downstream interfaces, namely the interfaces to
which the multicast data for this group be forwarded
command to enable the fast-leave feature globally.
command to disable the fast-leave feature globally.