If-Match Acl - H3C MSR 20-20 Command Reference Manual

1208 C 79: IP 4 R
HAPTER V
Description
Related commands:
Examples

if-match acl

Syntax
View
Parameters
Description
Related commands:
Examples
P C
OUTING OLICY ONFIGURATION
Use the display ip ip-prefix
prefix list. If no ip-prefix-name is specified, statistics for all IPv4 address prefix lists
will be displayed.
ip ip-prefix.
# Display the statistics of IPv4 prefix list abc.
<Sysname> display ip ip-prefix abc
Prefix-list abc
Permitted 0
Denied 0
index: 10
Table 285 Description on the fields of the display ip ip-prefix command.
Field
Prefix-list
Permitted
Denied
index
permit
1.0.0.0/11
ge
le
if-match acl acl-number
undo if-match acl
Routing policy view
acl-number: ACL number from 2000 to 3999.
Use the
if-match acl
Use the undo if-match
No ACL match criterion is configured by default.
if-match interface, if-match ip next-hop, if-match cost, if-match tag,
route-policy, apply ip-address next-hop, apply cost, apply local-preference,
apply origin,apply tag.
# Create routing policy policy1 with node 10, matching mode as permit. Define
an if-match clause to permit routes matching ACL 2000.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match acl 2000
C
OMMANDS
command to display the statistics of an IPv4 address
permit 1.0.0.0/11
Description
Name of the IPv4 prefix list
Number of routes satisfying the match criterion
Number of routes not satisfying the match criterion
Internal serial number of the IPv4 prefix list
Matching mode: permit or deny
Match IP address and mask
greater-equal, the lower limit mask
less-equal, the upper limit mask
command to configure an ACL match criterion.
command to remove the match criterion.
ge 22 le 32