Display Mpls Rsvp-Te Rsb-Content - H3C MSR 20-20 Command Reference Manual

display mpls rsvp-te rsb-content

Syntax
View
Parameter
Description
Example
LSP ID: 1
Upstream Label: 3
Token bucket rate: 0.00
Table 400 Description on the fields of display mpls rsvp-te reservation
Field
Interface Ethernet1/0
Tunnel Dest
Ingress LSR ID
LSP ID
Tunnel ID
Upstream Label
Token Bucket rate
Token Bucket Size
display mpls rsvp-te rsb-content { ingress-lsr-id Ispid tunnel-id egress-lsr-id
nexthop-address } [ | { begin | include | exclude } regular-expression ]
Any view
ingress-lsr-id: Ingress LSR ID.
lspid: Local LSP ID, in the range 1 to 65,535.
tunnel-id: Tunnel ID, in the range 0 to 65,535.
egress-lsr-id: Egress LSR ID.
nexthop-address: Next hop address.
|: Filters output by regular expression.
begin: Displays information beginning with a defined regular expression.
include: Displays information that includes a defined regular expression.
exclude: Displays information that excludes a defined regular expression.
regular-expression: Regular expression, a string of 1 to 80 characters without
spaces.
Use the
display mpls rsvp-te rsb-content
about RSVP-TE reservation state blocks (RSBs).
# Display information about RSVP-TE RSBs.
<Sysname> display mpls rsvp-te rsb-content 19.19.19.19 1 0 29.29.29.29 101.1
01.101.2
The RSB Content:
Tunnel ID: 1
Token bucket size: 0.00
Description
RSVP-TE enabled Ethernet interface
Tunnel destination, in the format of X.X.X.X
Ingress LSR ID, in the format of X.X.X.X
LSP ID
Tunnel ID
Upstream label
Token bucket rate, a traffic parameter
Token bucket size, a traffic parameter
command to display information
1581