Display Isis Interface - H3C MSR 20-20 Command Reference Manual

1044 C 74: IS-IS C
HAPTER

display isis interface

Syntax
View
Parameters
Description
C
ONFIGURATION OMMANDS
Restart Interval: 150
SA Bit Supported
Total Number of Interfaces = 1
Restart Status: RESTARTING
Number of LSPs Awaited: 3
T3 Timer Status:
Remaining Time: 239
T2 Timer Status:
Remaining Time: 59
IS-IS(1) Level-2 Restart Status
Restart Interval: 150
SA Bit Supported
Total Number of Interfaces = 1
Restart Status: RESTARTING
Number of LSPs Awaited: 3
T3 Timer Status:
Remaining Time: 239
T2 Timer Status:
Remaining Time: 59
Table 234 Description on the fields of the display isis graceful-restart status command
Field
Restart Interval
SA Bit Supported
Total Number of Interfaces = 1
Restart Status:
T3 Timer Status
T2 Timer Status:
display isis interface [ [ traffic-eng | verbose ] * | tunnel ] [ process-id | vpn-instance
vpn-instance-name ]
Any view
traffic-eng: Displays IS-IS traffic engineering information.
verbose: Displays IS-IS interface detail information.
tunnel: Displays IS-IS tunnel information.
process-id: IS-IS process ID, in the range of 1 to 65535.
vpn-instance-name: VPN instance name, a string of 1 to 31 characters.
Use the
display isis interface
information.
The information displayed by this command includes interface name, interface IP
address, interface link state and so on. Besides all the information displayed by
Description
Graceful Restart interval
The SA bit is set
The current IS-IS interface number
Graceful Restart status
Remaining time of T3 timer
Remaining time of T2 Timer
command to view IS-IS enabled interface