Natpt Enable; Natpt Max-Session - H3C MSR 20-20 Command Reference Manual

870 C 66: NAT-PT C
HAPTER
Example

natpt enable

Syntax
View
Parameter
Description
Example

natpt max-session

Syntax
View
C
ONFIGURATION OMMANDS
10 seconds for a DNS packet
■
5 seconds for a FINRST packet
■
5 seconds for a FRAG packet
■
20 seconds for an ICMP packet
■
240 seconds for a SYN packet
■
40 seconds for a UDP packet
■
86,400 seconds for a TCP packet
■
# Set the NAT-PT session timeout time to 30 seconds for UDP packets and to 45
seconds for ICMP packets.
<Sysname> system-view
[Sysname] natpt aging-time udp 30
[Sysname] natpt aging-time icmp 45
natpt enable
undo natpt enable
Interface view
None
Use the
natpt enable
Use the undo natpt enable
interface.
By default, the NAT-PT feature is disabled on an interface. That is, no NAT-PT is
implemented for packets received and sent on the interface.
# Enable the NAT-PT feature on an interface.
<Sysname> system-view
[Sysname] interface Ethernet1/0
[Sysname-Ethernet1/0] natpt enable
natpt max-session max-number
undo natpt max-session
System view
command to enable the NAT-PT feature on an interface.
command to disable the NAT-PT feature on an