Network; Maximum Load-Balancing (Rip View) - H3C MSR 20-20 Command Reference Manual

maximum load-balancing (RIP view)

Syntax
View
Parameters
Description
Examples

network

Syntax
View
Parameters
Description
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] import-route static cost 4
# Set the default cost for redistributed routes to 3.
[Sysname-rip-1] default cost 3
# Redistribute OSPF routes with the cost being the default cost.
[Sysname-rip-1] import-route ospf
maximum load-balancing number
undo maximum load-balancing
RIP view
number: Maximum number of load balanced routes, in the range 1 to 8.
Use the maximum load-balancing
of load balanced routes.
Use the
undo maximum load-balancing
# Specify the maximum number of load balanced routes as 2.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] maximum load-balancing 2
network network-address
undo network network-address
RIP view
network-address: IP address of a network segment, which can be the IP network
address of any interface.
Use the command to enable RIP on the interface attached to the
network
specified network.
Use the
undo network
specified network.
command to specify the maximum number
command to restore the default.
command to disable RIP on the interface attached to the
1171