Display Ripng Interface - H3C MSR 20-20 Command Reference Manual

1312 C 85: IP 6 RIP
HAPTER V

display ripng interface

Syntax
View
Parameters
Description
Examples
C C
NG ONFIGURATION OMMANDS
display ripng process-id interface [ interface-type interface-number ]
Any view
process-id: RIPng process number, in the range of 1 to 65535.
interface-type interface-number: Specified an interface.
Use the
display ripng interface
of the RIPng process.
If no interface is specified, information about all interfaces of the RIPng process
will be displayed.
# Display the interface information of RIPng process 1.
<Sysname> display ripng 1 interface
Interface-name: Ethernet1/0
Link Local Address: FE80::20F:E2FF:FE30:C16C
Split-horizon: on
MetricIn: 0
Default route: off
Summary address:
Table 318 Description on the fields of the display ripng interface command
Field
Interface-name
Link Local Address
Split-horizon
Poison-reverse
MetricIn/MetricOut
Default route
Summary address
command to display the interface information
3:: 64
3:: 16
Description
Name of an interface running RIPng.
Link-local address of an interface running RIPng
Indicates whether the split horizon function is enabled (on:
Enabled off: Disabled).
Indicates whether the poison reverse function is enabled (on:
Enabled off: Disabled).
Additional metric to incoming and outgoing routes
Only/Originate: Only means that the interface advertises only
■
default route. Originate means that the default route and
other RIPng routes are advertised.
Off, indicates that no default route is advertised or the
■
garbage-collect time expires after the default route
advertisement was disabled.
In garbage-collect status: With default route advertisement
■
disabled, the interface advertises the default route with metric
16 during the garbage-collect time.
The summarized IPv6 prefix and the summary IPv6 prefix on the
interface
Poison-reverse: off
MetricOut: 1