Display Ipv6 Policy-Based-Route Statistics; If-Match Acl6 - H3C MSR 20-20 Command Reference Manual

display ipv6 policy-based-route statistics

Syntax
View
Parameter
Description
Example

if-match acl6

Syntax
View
Parameter
Description
Related command:
display ipv6 policy-based-route statistics { interface interface-type interface-number
| local }
Any view
interface interface-type interface-number: Displays IPv6 policy routing statistics
on the specified interface.
local: Displays IPv6 system policy routing statistics.
Use the
display ipv6 policy-based-route statistics
policy routing statistics.
# Display IPv6 system policy routing statistics.
<Sysname> display ipv6 policy-based-route statistics local
Local policy based routing information:
ipv6 policy-based-route: test
permit node 10
Total packet dropped at node level: 0
Total packet denied: 0, forwarded: 0
Table 195 Description on fields of the display ipv6 policy-based-route statistics command
Field
Local policy based routing information
ipv6 policy-based-route: test
Total packet dropped at node level: 0
Total packet denied: 0, forwarded: 0
if-match acl6 acl6-number
undo if-match acl6
IPv6 policy-based-route view
acl6-number: IPv6 ACL number, in the range 2000 to 3999. The number of a basic
IPv6 ACL ranges from 2000 to 2999 and that of an advanced IPv6 ACL ranges
from 3000 to 3999.
Use the if-match acl6
Use the
undo if-match acl6
if-match packet-length.
Description
System policy routing information
Name of the referenced policy
Packets dropped by the node
Packets denied by the policy and packets
forwarded by the policy
command to define an IPv6 ACL match rule.
command to remove the IPv6 ACL match rule.
895
command to display IPv6