1150
C
76: OSPF C
HAPTER
ospf timer poll
Syntax
View
Parameters
Description
Related commands:
Examples
ospf timer retransmit
Syntax
View
Parameters
Description
C
ONFIGURATION
OMMANDS
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ospf timer hello 20
ospf timer poll seconds
undo ospf timer poll
Interface view
seconds: Poll interval in seconds, in the range 1 to 2147483647.
Use the
ospf timer poll
Use the
undo ospf timer poll
By default, the poll interval is 120 seconds.
When an NBMA interface finds its neighbor is dead, it will send hello packets at
the poll interval.
Note that:
The poll interval is at least four times the hello interval.
■
This configuration is not supported on the NULL interface.
■
ospf timer hello.
# Set the poll timer interval on the current interface to 130 seconds.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ospf timer poll 130
ospf timer retransmit interval
undo ospf timer retransmit
Interface view
interval: LSA retransmit timer interval in seconds, in the range 1 to 3600.
Use the
ospf timer retransmit
an interface.
command to set the poll interval on an NBMA interface.
command to restore the default value.
command to set the LSA retransmit interval on