Register-Whole-Checksum (Pim View) - H3C MSR 20-20 Command Reference Manual

View
Parameter
Description
Related command:
Example

register-whole-checksum (PIM view)

Syntax
View
Parameter
Description
Related command:
Example
undo register-suppression-timeout
Public instance PIM view, VPN instance PIM view
interval: Register suppression timeout in seconds, in the range of 1 to 3,600.
Use the
register-suppression-timeout
suppression timeout time.
Use the
undo register-suppression-timeout
setting.
By default, the register suppression timeout time is 60 seconds.
probe-interval (PIM view) and register-policy (PIM view).
# Set the register suppression timeout time to 70 seconds in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] register-suppression-timeout 70
register-whole-checksum
undo register-whole-checksum
Public instance PIM view, VPN instance PIM view
None
Use the
register-whole-checksum
calculate the checksum based on the entire register message.
Use the
undo register-whole-checksum
configuration.
By default, the checksum is calculated based on the header in the register
message.
register-policy (PIM view) and register-suppression-timeout (PIM view).
# Configure the router to calculate the checksum based on the entire register
message in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] register-whole-checksum
command to configure the register
command to restore the default
command to configure the router to
command to restore the default
1421