Timer Lsp-Max-Age; Timer Lsp-Refresh - H3C MSR 20-20 Command Reference Manual

Examples

timer lsp-max-age

Syntax
View
Parameters
Description
Related commands:
Examples

timer lsp-refresh

Syntax
View
# Set the maximum LSP generation interval to 10 seconds, initial interval to 100
milliseconds and the incremental interval to 200 milliseconds.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1]timer lsp-generation 10 100 200
# Set the maximum LSP generation interval to 15 seconds.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1]timer lsp-generation 15
timer lsp-max-age seconds
undo timer lsp-max-age
IS-IS view
seconds: Specifies the LSP maximum aging time in seconds, ranging from 1 to
65535.
Use the
timer lsp-max-age
the current router.
Use the undo timer lsp-max-age
The default is 1200 seconds.
A router puts the specified LSP maximum aging time into an LSP before
advertisement. When the LSP is received by other routers, the aging time will
decrease as the time goes by. If no update is received for the LSP after its aging
time decreases to 0, the LSP will be deleted from the LSDB.
timer lsp-refresh.
# Set the maximum LSP aging time to 1500 seconds.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] timer lsp-max-age 1500
timer lsp-refresh seconds
undo timer lsp-refresh
IS-IS view
command to set the LSP maximum aging time for
command to restore the default.
1085