Is-Name Map; Is-Snmp-Traps Enable - H3C MSR 20-20 Command Reference Manual

is-name map

Syntax
View
Parameters
Description
Examples

is-snmp-traps enable

Syntax
View
Parameters
Description
Examples
is-name map sys-id map-sys-name
undo is-name map sys-id
IS-IS view
sys-id: System ID or a pseudonode ID of a remote IS.
map-sys-name: Specifies a name for the remote IS, a string of 1 to 64 characters.
Use the is-name map
system ID corresponds to only one name.
Use the
undo is-name map
By default, no name is configured for a remote IS.
# Map the name RUTB to the remote IS 0000.0000.0041.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] is-name map 0000.0000.0041 RUTB
is-snmp-traps enable
undo is-snmp-traps
IS-IS view
None
Use the
is-snmp-traps enable
IS-IS.
Use the
undo is-snmp-traps
SNMP Trap is enabled by default.
# Enable SNMP Trap.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] is-snmp-traps enable
command to map a name to a remote IS. Each remote IS
command to remove the configuration.
command to enable the SNMP Trap function of
command to disable this function.
1075