Display Ospf Traffic-Adjustment - H3C MSR 20-20 Command Reference Manual

display ospf traffic-adjustment

Syntax
View
Parameter
Description
Example
Table 418 Description on the fields of the display ospf mpls-te command
Field
Local Interface Address
Remote Interface Address
TE Metric
Maximum bandwidth
Maximum reservable bandwidth Maximum reservable bandwidth
Admin Group
Global Pool
Unreserved BW [0] to [7]
Sub Pool
Unreserved BW [0] to [7]
Bandwidth Constraints
BC 0-1
Local Overbooking Multipliers
LOM 0-1
display ospf [ process-id ] traffic-adjustment
Any view
process-id: OSPF process ID, in the range 1 to 65535.
Use the
display ospf traffic-adjustment
tunnel traffic adjustment (IGP shortcut and forwarding adjacency) for a specified
or all OSPF processes.
# Display the settings of tunnel traffic adjustment for all OSPF processes.
<Sysname> display ospf traffic-adjustment
OSPF Process 100 with Router ID 100.0.0.1
Traffic adjustment
Interface: 100.0.0.1 (Tunnel0)
Type: Forwarding Adjacency
Neighbor ID: 100.0.0.2
Configuration:
Neighbor Ip Address: 100.0.0.2
Cost
Cost Type
Hold time
Table 419 Description on the fields of the display ospf traffic-adjustment command
Field
Interface
Description
Local interface address
Remote interface address
TE metric
Maximum bandwidth
Administrative group attribute
Global pool
Available bandwidths at the eight levels in the global pool
Subpool (only significant for DS-TE LSAs)
Available bandwidths at the eight levels in the subpool
Bandwidth constraints (only significant for DS-TE LSAs)
Two types of bandwidth constraints (only significant for
DS-TE LSAs): BC0 and BC1
Local overbooking multipliers
Two local overbooking multipliers (only significant for DS-TE
LSAs): LOM 0 and LOM 1
command to display the settings of
State: Up
Cost: 100
: -10
: Relative
: 10s
Description
Tunnel interface address and name
1601