Display Natpt Address-Group; Display Natpt Address-Mapping - H3C MSR 20-20 Command Reference Manual

66

display natpt address-group

Syntax
View
Parameter
Description
Example

display natpt address-mapping

Syntax
View
Parameter
Description
Example
NAT-PT C
display natpt address-group
Any view
None
Use the
display natpt address-group
information of a NAT-PT address pool.
# Display the configuration information of a NAT-PT address pool.
<Sysname> display natpt address-group
NATPT IPv4 Address Pool Information:
1: from 1.1.1.1
Table 183 Description on fields of the display natpt address-group command
Field
1:
from 1.1.1.1
to 1.1.1.4
display natpt address-mapping
Any view
None
Use the
display natpt address-mapping
dynamic NAT-PT mappings.
The displayed information does not include the information about port translation
through the NAPT-PT mechanism.
# Display the static and dynamic NAT-PT mapping.
ONFIGURATION
command to display the configuration
to 1.1.1.4
Description
Address pool number
Start address in an address pool
End address in an address pool
C
OMMANDS
command to display the static and