Ipv6 Nd Ns Retrans-Timer; Ipv6 Nd Nud Reachable-Time - H3C MSR 20-20 Command Reference Manual

852 C 65: IP 6 B
HAPTER V
Parameter
Description
Example

ipv6 nd ns retrans-timer

Syntax
View
Parameter
Description
Example

ipv6 nd nud reachable-time

Syntax
C C
ASICS ONFIGURATION OMMANDS
value: Number of hops, in the range of 0 to 255. When it is set to 0, the Cur Hop
Limit field in RA messages sent by the device is 0. That is, the number of hops is
determined by the host itself, but not specified by the device.
Use the ipv6 nd hop-limit
the device.
Use the
undo ipv6 nd hop-limit
By default, the hop limit advertised by the device is 64.
# Set the hop limit advertised by the device to 100.
<Sysname> system-view
[Sysname] ipv6 nd hop-limit 100
ipv6 nd ns retrans-timer value
undo ipv6 nd ns retrans-timer
Interface view
value: Interval for sending NS messages in milliseconds, in the range of 1,000 to
3,600,000.
Use the
ipv6 nd ns retrans-timer
messages. The local interface sends NS messages at intervals of this value.
Furthermore, the Retrans Timer field in RA messages sent by the local interface is
equal to this value.
Use the
undo ipv6 nd ns retrans-timer
interval.
By default, the local interface sends NS messages at intervals of 1,000 milliseconds
and the Retrans Timer field in RA messages sent by the local interface is 0.
# Specify Ethernet1/0 to send NS messages at intervals of 10,000 milliseconds.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipv6 nd ns retrans-timer 10000
ipv6 nd nud reachable-time value
undo ipv6 nd nud reachable-time
command to configure the hop limit advertised by
command to restore the default hop limit.
command to set the interval for sending NS
command to restore the default