Ipv6 Import-Route - H3C MSR 20-20 Command Reference Manual

1274 C 83: IP 6 IS-IS C
HAPTER V
Description
Related commands:
Examples

ipv6 import-route

Syntax
View
Parameters
C
ONFIGURATION OMMANDS
ipv6-prefix-name: Name of an IPv6 prefix list used to filter incoming routes, a
string of 1 to 19 characters.
route-policy-name: Name of a routing policy used to filter incoming routes, a
string of 1 to 19 characters.
Use the
ipv6 filter-policy import
received routes.
Use the undo ipv6 filter-policy import
The filtering is disabled by default.
In some cases, only the routing information satisfying certain conditions will be
received. You can configure the filtering conditions using the ipv6 filter-policy
command.
ipv6 filter-policy export.
# Reference the IPv6 ACL 2003 to filter the received routes.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] ipv6 filter-policy 2003 import
ipv6 import-route protocol [ process-id ] [ allow-ibgp ] [ cost cost | [ level-1 | level-2 |
level-1-2 ] | route-policy route-policy-name | tag tag ] *
undo ipv6 import-route protocol [ process-id ]
IS-IS view
protocol: Redistributes routes from a specified routing protocol, which can be
direct, static, ripng, isisv6, bgp4+ or ospfv3.
process-id: Process ID of the routing protocol of ripng, isisv6 or ospfv3, in the
range of 1 to 65535. The default is 1.
cost: Cost for redistributed routes, ranging from 0 to 4261412864.
level-1: Redistributes routes into Level-1 routing table.
level-2: Redistributes routes into Level-2 routing table.
level-1-2: Redistributes routes into Level-1 and Level-2 routing tables.
route-policy-name: Name of a routing policy used to filter routes when they are
being redistributed, a string of 1 to 19 characters.
command to configure IPv6 IS-IS to filter the
command to disable the filtering.