Isis Ipv6 Enable - H3C MSR 20-20 Command Reference Manual

1278 C 83: IP 6 IS-IS C
HAPTER V
Examples

isis ipv6 enable

Syntax
View
Parameters
Description
Examples
C
ONFIGURATION OMMANDS
Use the undo ipv6 summary
Route summarization is disabled by default.
Configuring summary routes can reduce the size of the route table, LSPs and
LSDB. Routes to be summarized can be IS-IS routes or redistributed routes. The
cost of a summary route is the smallest cost among all summarized routes.
# Configure a summary route of 2002::/32.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] ipv6 summary 2002:: 32
isis ipv6 enable [ process-id ]
undo isis ipv6 enable
Interface view
process-id: IS-IS process ID, ranging from 1 to 65535. The default is 1.
Use the
isis ipv6 enable
on the interface.
Use the
undo isis ipv6 enable
IPv6 is disabled on the interface by default.
# Enable global IPv6, create IS-IS routing process 1, enable IPv6 for the process,
and enable IPv6 for the process on interface Serial 2/0.
<Sysname> system-view
[Sysname] ipv6
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] ipv6 enable
[Sysname-isis-1] quit
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ipv6 address 2002::1/64
[Sysname-Serial2/0] isis ipv6 enable 1
command to remove the summary route.
command to enable IPv6 for the specified IS-IS process
command to disable the configuration.