Filter-Policy Import (Ipv6 Address Family View) - H3C MSR 20-20 Command Reference Manual

Description
Examples

filter-policy import (IPv6 address family view)

Syntax
View
Parameters
Description
ipv6-prefix-name: Specifies the name of an IPv6 prefix list used to match against
the destination address field of routing information. The name is a string of 1 to
19 characters.
protocol: Filters routes redistributed from the routing protocol. It can be direct,
isisv6, ospfv3, ripng, and static at present. If no protocol is specified, all routes
will be filtered when advertised.
process-id: Process ID of the routing protocol, in the range 1 to 65535. It is
available only when the protocol is isisv6, ospfv3 or ripng.
Use the
filter-policy export
specified filter.
Use the undo filter-policy export
routes.
By default, no outbound routing information is filtered.
If a protocol is specified, only routes redistributed from the specified protocol are
filtered. If no protocol is specified, all redistributed routes will be filtered.
# Reference ACL6 2001 to filter all outbound IPv6 BGP routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] filter-policy 2001 export
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } import
undo filter-policy import
IPv6 address family view
acl6-number: Number of an IPv6 ACL used to match against the destination
address field of routing information, ranging from 2000 to 3999.
ipv6-prefix-name: Name of an IPv6 prefix list used to match against the destination
address field of routing information, a string of 1 to 19 characters.
Use the filter-policy import
using a specified filter.
Use the
undo filter-policy import
information.
By default, no inbound routing information is filtered.
command to filter outbound routes using a
command to cancel filtering outbound
command to filter inbound routing information
command to cancel filtering inbound routing
1239