Multicast Ipv6 Forwarding-Table Route-Limit; Multicast Ipv6 Load-Splitting - H3C MSR 20-20 Command Reference Manual

1438 C 91: IP 6 M
HAPTER V
Related command:
Example

multicast ipv6 forwarding-table route-limit

Syntax
View
Parameter
Description
Related command:
Example

multicast ipv6 load-splitting

Syntax
View
Parameter
R F
ULTICAST OUTING AND ORWARDING
display multicast ipv6 forwarding-table.
# Set the maximum number of downstream nodes for a single route in the IPv6
multicast forwarding table to 120.
<Sysname> system-view
[Sysname] multicast ipv6 forwarding-table downstream-limit 120
multicast ipv6 forwarding-table route-limit limit
undo multicast ipv6 forwarding-table route-limit
System view
limit: Maximum number of routing entries in the IPv6 multicast forwarding table.
The value ranges 0 to 900.
Use the multicast ipv6 forwarding-table route-limit
the maximum number of routing entries in the IPv6 multicast forwarding table.
Use the
undo multicast ipv6 forwarding-table route-limit
restore the maximum number of routing entries in the IPv6 multicast forwarding
table to the system default.
By default, the maximum number of routing entries in the IPv6 multicast
forwarding table is 900.
The allowable maximum number of routing entries varies with devices.
display multicast ipv6 forwarding-table.
# Set the maximum number of routing entries in the IPv6 multicast forwarding
table to 200.
<Sysname> system-view
[Sysname] multicast ipv6 forwarding-table route-limit 200
multicast ipv6 load-splitting {source | source-group }
undo multicast ipv6 load-splitting
System view
source: Specifies to implement IPv6 multicast load splitting on a per-source basis.
C C
ONFIGURATION OMMANDS
command to configure
command to