Ipv6 Nd Ra Interval; Ipv6 Nd Ra Prefix - H3C MSR 20-20 Command Reference Manual

854 C 65: IP 6 B
HAPTER V

ipv6 nd ra interval

Syntax
View
Parameter
Description
Example

ipv6 nd ra prefix

Syntax
View
C C
ASICS ONFIGURATION OMMANDS
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipv6 nd ra halt
ipv6 nd ra interval max-interval-value min-interval-value
undo ipv6 nd ra interval
Interface view
max-interval-value: Maximum interval for advertising RA messages in seconds, in
the range of 4 to 1,800.
min-interval-value: Minimum interval for advertising RA messages in seconds, in
the range of 3 to 1,350.
Use the ipv6 nd ra interval
interval for advertising RA messages. The device advertises RA messages at
intervals of a random value between the maximum interval and the minimum
interval.
Use the
undo ipv6 nd ra interval
By default, the maximum interval between RA messages is 600 seconds, and the
minimum interval is 200 seconds.
Note the following:
The minimum interval should be three-fourths of the maximum interval or less.
■
The maximum interval for sending RA messages should be less than or equal to
■
the router lifetime in RA messages.
# Set the maximum interval for advertising RA messages to 1,000 seconds and the
minimum interval to 700 seconds.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipv6 nd ra interval 1000 700
ipv6 nd ra prefix { ipv6-prefix prefix-length | ipv6-prefix/prefix-length } valid-lifetime
preferred-lifetime [ no-autoconfig | off-link ] *
undo ipv6 nd ra prefix ipv6-prefix
Interface view
command to set the maximum and minimum
command to restore the default.