H3C MSR 20-20 Command Reference Manual page 1097

Msr 20/30/50 series routers
Hide thumbs Also See for MSR 20-20:
Table of Contents

Advertisement

Table 254 Description on the fields of the debugging isis self-originate-update command
Field
UPDT: Adding Redist Address ipAddress into
pduLevel LSPs,
UPDT: Updating LSP Option Success
UPDT: Error Adding Summary Reachability in
pduLevel LSPs
Table 255 Description on the fields of the debugging isis sending-packet-content
command
Field
Sending pduLevel pduType on circuitName.
** ** ** ** ** ** ** ** ** ** ** ** ** **
** ** ** ** **** ** ** ** ** **
Table 256 Description on the fields of the debugging isis snp-packet command
Field
CSNP Range from startLspId to endLspId
Rxed pduType From sourceId (circuitName)
SNP PDU Dropped
Sending Level pduLevel PSNP PDU fails
Sending content on circuitName
SNP not processed, System in Low Memory
SNP not processed, System in Overload State
(Low Memory).
Psnp not processed, current IS is Not DIS
Csnp not processed on DIS
SNP Authentication Failure
Description
The redistributed route was being added to
the local LSPs.
IS-IS updated the LSP TLV successfully.
IS-IS failed to add a summary address to the
local LSPs.
Description
IS-IS is sending a PDU.
pduLevel: L1 or L2.
pduTyp: PDU type, which can be PSNP or
CSNP.
circuitName: Name of the sending interface.
Contents in the corresponding CSNP/PSNP
packet, including the header, LSP entries, and
Authentication Information field.
Description
Range of received CSNP packets
startLspId: Start LSP ID.
endLspId: End LSP ID.
PDUs were received.
pduType: PDU type, which can be PSNP or
CSNP.
sourceId: Source NSAP address of the packet.
circuitName: Name of the receiving interface.
SNP PDU was dropped.
Sending a PSNP packet failed.
pduLevel: PDU packet level, which can be L1
or L2.
A PSNP packet is being sent.
circuitName: Name of the sending interface.
content: PSNP packet content.
System memory was insufficient; therefore,
the SNP packets were not processed.
The system is in the Overload state; therefore,
the SNP packets were not processed.
The current IS was not a DIS; therefore, the
received PSNP packet was not processed.
The CSNP packet was not processed on the
DIS.
SNP authentication failed.
1097

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr 20-21Msr 30-16Msr 30-20Msr 30-40Msr 30-60Msr 50 ... Show all

Table of Contents