Related command:
Example
igmp version
Syntax
View
Parameter
Description
Related command:
Example
last-member-query-interval
Syntax
View
Parameter
By default, the IGMP query interval is 60 seconds.
timer query (IGMP view), igmp timer other-querier-present, display igmp
interface.
# Set the IGMP general query interval to 125 seconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] igmp timer query 125
igmp version version-number
undo igmp version
Interface view
version-number: IGMP version, in the range of 1 to 3.
Use the
igmp version
interface.
Use the
undo igmp version
default.
The default IGMP version is version 2.
version (IGMP view).
# Set the IGMP version to IGMPv1 on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] igmp version 1
last-member-query-interval interval
undo last-member-query-interval
Public instance IGMP view, VPN instance IGMP view
interval: Last-member query interval, namely the interval in seconds at which the
IGMP querier sends IGMP group-specific queries after it receives a leave-group
message from a host, with an effective range of 1 to 5.
command to configure the IGMP version on the current
command to restore the IGMP version to the system
1357