Display Mpls Rsvp-Te Peer - H3C MSR 20-20 Command Reference Manual

1576 C 96: MPLS TE C
HAPTER

display mpls rsvp-te peer

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
display mpls rsvp-te peer [ interface interface-type interface-number ] [ | { begin |
include | exclude } regular-expression ]
Any view
interface interface-type interface-number: Specifies an interface by its type and
number.
|: Filters output by regular expression.
begin: Displays information beginning with a defined regular expression.
include: Displays information that includes a defined regular expression.
exclude: Displays information that excludes a defined regular expression.
regular-expression: Regular expression, a string of 1 to 80 characters without
spaces.
Use the
display mpls rsvp-te peer
RSVP-TE neighbors on the specified or all interfaces.
# Display information about RSVP-TE neighbors on all interfaces.
<Sysname> display mpls rsvp-te peer
Interface Ethernet1/0
Neighbor Addr: 80.4.1.1
SrcInstance: 841
PSB Count: 0
Hello Type Sent: ACK
SRefresh Enable: NO
Graceful Restart State: Ready
Restart Time: 200 sec
Interface Ethernet1/1
Neighbor Addr: 80.2.1.1
SrcInstance: 832
PSB Count: 1
Hello Type Sent: REQ
SRefresh Enable: NO
Graceful Restart State: Not ready
Restart Time: ---
Table 397 Description on the fields of the display mpls rsvp-te peer command
Field
Interface Ethernet1/0
Neighbor Addr:
SrcInstance
NbrSrcInstance
PSB Count
command to display information about
NbrSrcInstance: 928
RSB Count: 1
Neighbor Hello Extension: ENABLE
Reliability Enable: YES
Recovery Time: 150 sec
NbrSrcInstance: 920
RSB Count: 0
Neighbor Hello Extension: ENABLE
Reliability Enable: YES
Recovery Time: ---
Description
RSVP-TE enabled Ethernet interface
Neighbor address, in the format of X.X.X.X.
Instance of source Message ID
Instance of neighbor Message ID
Number of path state blocks