Hello-Option Dr-Priority (Ipv6 Pim View); Hello-Option Holdtime (Ipv6 Pim View) - H3C MSR 20-20 Command Reference Manual

hello-option dr-priority (IPv6 PIM view)

Syntax
View
Parameter
Description
Related command:
Example

hello-option holdtime (IPv6 PIM view)

Syntax
View
Parameter
Description
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000] rule permit source ff7e:140:20::101 64
[Sysname-acl6-basic-2000] quit
[Sysname] pim ipv6
[Sysname-pim6] embedded-rp 2000
hello-option dr-priority priority
undo hello-option dr-priority
IPv6 PIM view
priority: Router priority for DR election, in the range of 0 to 4294967295. A larger
value of this argument means a higher priority.
Use the
hello-option dr-priority
router priority for DR election.
Use the undo hello-option dr-priority
By default, the router priority for DR election is 1.
pim ipv6 hello-option dr-priority.
# Set the router priority for DR election to 3.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option dr-priority 3
hello-option holdtime interval
undo hello-option holdtime
IPv6 PIM view
interval: IPv6 PIM neighbor timeout time in seconds, with an effective range of 1
to 65,535.
Use the hello-option holdtime
timeout time.
Use the
undo hello-option holdtime
command to configure the global value of the
command to restore the default setting.
command to configure the IPv6 PIM neighbor
command to restore the default setting.
1479