Display Bgp Routing-Table As-Path-Acl - H3C MSR 20-20 Command Reference Manual

display bgp routing-table as-path-acl

Syntax
View
Parameters
Description
Examples
Table 219 Description on the fields of the display bgp routing command
Field Description
BGP Local router BGP Local router ID
ID
Status codes Status codes:
* - valid
> - best
d - damped
h - history
i - internal (IGP)
s - summary suppressed (suppressed)
S - Stale
Origin i - IGP (originated in the AS)
e - EGP (learned through EGP)
? - incomplete (learned by other means)
Network Destination network address
Next Hop Next hop IP address
MED MULTI_EXIT_DISC attribute
LocPrf Local preference value
PrefVal Preferred value of the route
Path AS_PATH attribute, recording the ASs the packet has passed to avoid
routing loops
PrefVal Preferred value
Ogn Origin attribute of the route, one of the following values:
i
e
?
display bgp routing-table as-path-acl as-path-acl-number
Any view
as-path-acl-number: Displays routing information permitted by the AS path ACL,
which is specifies with a number from 1 to 256.
Use the display bgp routing as-path-acl
permitted by an as-path ACL.
# Display BGP routes permitted by AS path ACL 1.
Indicates that the route is interior to the AS.
Summary routes and the routes configured using the network
command are considered IGP routes.
Indicates that the route is learned via the exterior gateway
protocol (EGP).
Short for INCOMPLETE. It indicates that the origin of the route is
unknown and the route is learned by other means.
command to display BGP routes
969