Display Mpls Rsvp-Te Statistics - H3C MSR 20-20 Command Reference Manual

1584 C 96: MPLS TE C
HAPTER

display mpls rsvp-te statistics

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
Tunnel Dest: 29.29.29.29
LSP ID: 1
Session Name: Tunnel1
Previous Hop Address: 19.19.19.19
Token bucket rate: 0.0
Table 402 Description on fields of the display mpls rsvp-te sender command
Field
Interface Ethernet1/0
Tunnel Dest
Ingress LSR ID
LSP ID
Tunnel ID
Session Name:
Previous Hop Address
Token Bucket rate
Token Bucket Size
display mpls rsvp-te statistics { global | interface [ interface-type
interface-number ] }
Any view
global: Display global RSVP-TE information.
interface: Displays statistics about RSVP-TE for a specified or all interfaces if no
interface is specified.
interface-type interface-number: Specifies an interface for which statistics about
RSVP-TE is displayed.
Use the display mpls rsvp-te statistics
RSVP-TE.
# Display global RSVP-TE statistics.
<Sysname> display mpls rsvp-te statistics global
LSR ID: 1.1.1.1
PSB Count: 1
RFSB Count: 0
LSP Count: 1
Total Statistics Information:
PSB CleanupTimeOutCounter: 0
SendPacketCounter: 55
SendPathCounter: 5
SendResvCounter: 0
SendResvConfCounter: 0
SendHelloCounter: 2
Ingress LSR ID: 19.19.19.19
Session Tunnel ID: 0
Token bucket size: 0.00
Description
RSVP-TE enabled Ethernet interface
Tunnel destination, in the format of X.X.X.X
Ingress LSR ID, in the format of X.X.X.X
LSP ID
Tunnel ID
Session name
Previous hop address, in the format of X.X.X.X
Token bucket rate, a traffic parameter
Token bucket size, a traffic parameter
command to display statistics about
RSB Count: 1
TCSB Count: 1
RSB CleanupTimeOutCounter: 0
RecPacketCounter: 54
RecPathCounter: 0
RecResvCounter: 4
RecResvConfCounter: 0
RecHelloCounter: 48