Default-Route Originate; Display Rip - H3C MSR 20-20 Command Reference Manual

1162 C 77: RIP C
HAPTER
Related commands:
Examples

default-route originate

Syntax
View
Parameters
Description
Examples

display rip

Syntax
View
C
ONFIGURATION OMMANDS
By default, the default metric of redistributed routes is 0.
When you use the import-route command to redistribute routes from other
protocols without specifying a metric, the metric specified by the default cost
command applies.
import-route (RIP view).
# Set the default metric for redistributed routes to 3.
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] default cost 3
default-route originate cost value
undo default-route originate
RIP view
value: Cost of the default route, in the range of 1 to 15.
Use the default-route originate cost
with the specified metric to RIP neighbors.
Use the
undo default-route originate
default route.
By default, no default route is sent to RIP neighbors.
The RIP router with this feature configured will not receive any default routes from
RIP neighbors.
# Send a default route with a metric of 2.
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] default-route originate cost 2
# Disable default route sending.
[Sysname-rip-100] undo default-route originate
display rip [ process-id | vpn-instance vpn-instance-name ]
Any view
command to advertise a default route
command to disable the sending of a