1340
C
87: M
HAPTER
ULTICAST
multicast load-splitting
Syntax
View
Parameter
Description
Example
multicast longest-match
Syntax
View
Parameter
Description
R
F
C
OUTING AND
ORWARDING
multicast load-splitting { source | source-group }
undo multicast load-splitting
System view, VPN instance view
source: Specifies to implement per-source load splitting.
source-group: Specifies to implement per-source and per-group load splitting
simultaneously.
Use the
multicast load-splitting
traffic.
Use the
undo multicast load-splitting
multicast traffic.
By default, load splitting of multicast traffic is disabled.
# Enable per-source load splitting of multicast traffic in the public instance.
<Sysname> system-view
[Sysname] multicast load-splitting source
# Enable per-source load splitting of multicast traffic in VPN instance mvpn.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast load-splitting source
multicast longest-match
undo multicast longest-match
System view, VPN instance view
None
Use the
multicast longest-match
on the longest match, namely based on the mask length.
Use the
undo multicast longest-match
of route selection based on the longest match.
By default, routes are selected according to the order of route entries.
C
ONFIGURATION
OMMANDS
command to enable load splitting of multicast
command to disable load splitting of
command to configure route selection based
command to remove the configuration