Mpls Te Metric - H3C MSR 20-20 Command Reference Manual

View
Parameter
Description
Example

mpls te metric

Syntax
View
Parameter
Description
Related command:
Example
undo mpls te max-reservable-bandwidth
Interface view
bandwidth-value: Maximum reservable bandwidth for RSVP traffic, in the range 1
to 32000000 kbps (global pool bandwidth).
bc1 value: Reservable bandwidth in kbps on the interface, in the range 1 to
bandwidth-value (subpool bandwidth).
Use the mpls te max-reservable-bandwidth
maximum reservable bandwidth.
Use the
undo mpls te max-reservable-bandwidth
configuration.
The bandwidth in this command is configured only for MPLS traffic.
# On interface Ethernet 1/0 set maximum reservable bandwidth for MPLS TE to
1158 kbps, and the reservable BC1 bandwidth to 200 kbps.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] mpls te max-reservable-bandwidth 1158 bc1 200
mpls te metric value
undo mpls te metric
Interface view
value: TE metric of the link, in the range 0 to 4294967295.
Use the
mpls te metric
Use the
undo mpls te metric
By default, the link uses its IGP metric as its TE metric.
mpls te path metric-type.
# Assign a TE metric of 20 to the link on interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] mpls te metric 20
command to assign a TE metric to the link.
command to restore the default.
command to configure the
command to remove the
1627