Parameters
Description
Examples
remark atm-clp
Syntax
View
Parameters
Description
Examples
cpu: Redirects to CPU.
interface: Redirects to specified interface.
next-hop: Redirects to the next hop.
interface-type interface-number: Specifies an interface by its type and number.
User the redirect command to configure redirect action for traffic behavior.
User the undo redirect command to delete the configuration.
c
CAUTION: When redirect action for QoS is configured, if the outbound interface
to be redirected to is bound with an NAT virtual interface, packets sent from this
outbound interface will be redirected to the L3+NAT card, resulting in QoS
redirection failure.
# Configure redirect action for traffic behavior, to the interface Ethernet1/0.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] redirect interface ethernet1/0
remark atm-clp atm-clp-value
undo remark atm-clp
Traffic behavior view
atm-clp-value: Value of the cell loss priority (CLP) bit in ATM cells, 0 or 1.
Use the
remark atm-clp
ATM cells in the class.
Use the
undo remark atm-clp
ATM cells.
By default, the CLP bit of ATM cells is not remarked.
The policy that includes CLP remark can apply only on the outbound direction of
interfaces or ATM PVCs.
# Remark the CLP bit of ATM cells to 1.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark atm-clp 1
command to have the system remark the CLP bit of
command to disable remarking the CLP bit of
1795