872
C
66: NAT-PT C
HAPTER
natpt turn-off tos
Syntax
View
Parameter
Description
Example
natpt turn-off traffic-class
Syntax
View
Parameter
Description
Example
C
ONFIGURATION
OMMANDS
natpt turn-off tos
undo natpt turn-off tos
System view
None
Use the
natpt turn-off tos
translated from IPv6 to 0.
Use the
undo natpt turn-off tos
translated from an IPv6 packet to the value of the Traffic Class field in the IPv6
packet.
By default, the value of the ToS field in an IPv4 packet translated from an IPv6
packet is the same as that of the Traffic Class field in the IPv6 packet.
# Set the ToS field in an IPv4 packet translated from an IPv6 packet to 0.
<Sysname> system-view
[Sysname] natpt turn-off tos
natpt turn-off traffic-class
undo natpt turn-off traffic-class
System view
None
Use the
natpt turn-off traffic-class
IPv6 packet translated from an IPv4 packet to 0.
Use the
undo natpt turn-off traffic-class
field in an IPv6 packet translated from an IPv4 packet to the value of the ToS field
in the IPv4 packet.
By default, the value of the Traffic Class field in an IPv6 packet translated from an
IPv4 packet is the same as that of the ToS field in the IPv4 packet.
# Set the Traffic Class field in an IPv6 packet translated from an IPv4 packet to 0.
<Sysname> system-view
[Sysname] natpt turn-off traffic-class
command to set the ToS field in an IPv4 packet
command to set the ToS field in an IPv4 packet
command to set the Traffic Class field in an
command to set the Traffic Class