Timer Join-Prune (Ipv6 Pim View); Timer Spt-Switch (Ipv6 Pim View) - H3C MSR 20-20 Command Reference Manual

1502 C 93: IP 6 PIM C
HAPTER V
View
Parameter
Description
Related command:
Example

timer join-prune (IPv6 PIM view)

Syntax
View
Parameter
Description
Related command:
Example

timer spt-switch (IPv6 PIM view)

Syntax
C
ONFIGURATION OMMANDS
IPv6 PIM view
interval: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.
Use the timer hello
Use the
undo timer hello
By default, hello messages are sent at the interval of 30 seconds.
pim ipv6 timer hello.
# Set the global hello interval to 40 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] timer hello 40
timer join-prune interval
undo timer join-prune
IPv6 PIM view
interval: Join/prune interval in seconds, with an effective range of 1 to
2,147,483,647.
Use the
timer join-prune
Use the undo timer join-prune
By default, the join/prune interval is 60 seconds.
pim ipv6 timer join-prune.
# Set the global join/prune interval to 80 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] timer join-prune 80
timer spt-switch interval
undo timer spt-switch
command to configure the hello interval globally.
command to restore the default setting.
command to configure the join/prune interval globally.
command to restore the default setting.