1766
C
104: L2TP C
HAPTER
tunnel flow-control
Syntax
View
Parameter
Description
Example
tunnel name
Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION
OMMANDS
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel avp-hidden
tunnel flow-control
undo tunnel flow-control
L2TP group view
None
Use the
tunnel flow-control
function.
Use the
undo tunnel flow-control
control function.
By default, the L2TP tunnel flow control function is disabled.
# Enable the L2TP tunnel flow control function.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel flow-control
tunnel name name
undo tunnel name
L2TP group view
name: Name for the tunnel at the local end, a string of 1 to 30 characters.
Use the
tunnel name
Use the
undo tunnel name
By default, a tunnel takes the system name of the device as its name at the local
end.
sysname on page 2423.
# Specify the local name for a tunnel as itsme.
command to enable the L2TP tunnel flow control
command to disable the L2TP tunnel flow
command to specify the name of a tunnel at the local end.
command to restore the default.