Display Multicast Ipv6 Rpf-Info - H3C MSR 20-20 Command Reference Manual

Description
Related command:
Example

display multicast ipv6 rpf-info

Syntax
View
Parameter
Description
outgoing-interface: Displays routing entries whose outgoing interface is the
specified ones.
exclude: Displays routing entries whose OIL excludes the specified interface.
include: Displays routing entries whose OIL includes the specified interface.
match: Displays routing entries whose OIL includes only the specified interface.
Use the
display multicast ipv6 routing-table
information of an IPv6 multicast routing table.
display multicast ipv6 forwarding-table.
# Display the information of an IPv6 multicast routing table.
<Sysname> display multicast ipv6 routing-table
IPv6 multicast routing table
Total 1 entry
00001. (2001::2, FFE3::101)
Uptime: 00:00:14
Upstream Interface: Ethernet1/0
List of 1 downstream interface
1: Ethernet1/1
Table 349 Description on the fields of the display multicast ipv6 routing-table command
Field
00001
(2001::2, FFE3::101)
Uptime
Upstream interface
List of 2 downstream interfaces
display multicast ipv6 rpf-info ipv6-source-address [ ipv6-group-address ]
Any view
ipv6-source-address: IPv6 multicast source address.
ipv6-group-address: IPv6 multicast group address, in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any
hexadecimal number from 0 to F.
Use the command to display RPF information of an IPv6 multicast source.
command to display the
Description
Sequence number of the (S, G) entry
(S, G) entry in an IPv6 multicast forwarding table
Length of time a (S, G) entry has been up.
Upstream interface of a (S, G) entry. Multicast packets
should arrive through this interface
Downstream interface list. These interfaces need to forward
multicast packets.
1435