C-Rp Advertisement-Interval (Pim View) - H3C MSR 20-20 Command Reference Manual

1390 C 90: PIM C
HAPTER
Related command:
Example

c-rp advertisement-interval (PIM view)

Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION OMMANDS
No C-RPs are configured by default.
Note that:
If you do not specify a group range for the C-RP, the C-RP will serve all
■
multicast groups.
If you wish a router to be a C-RP for multiple group ranges, you need to include
■
these multiple group ranges in multiple rules in the ACL corresponding to the
group-policy keyword.
If you carry out this command repeatedly on the same interface, the last
■
configuration will take effect.
c-bsr (PIM view).
# In the public instance configure Ethernet 1/0 to be a C-RP for multicast groups
225.1.0.0/16 and 226.2.0.0/16, with a priority of 10.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 225.1.0.0 0.0.255.255
[Sysname-acl-basic-2000] rule permit source 226.2.0.0 0.0.255.255
[Sysname-acl-basic-2000] quit
[Sysname] pim
[Sysname-pim] c-rp ethernet 1/0 group-policy 2000 priority 10
c-rp advertisement-interval interval
undo c-rp advertisement-interval
Public instance PIM view, VPN instance PIM view
interval: C-RP-Adv interval in seconds, with an effective range of 1 to 65,535.
Use the
c-rp advertisement-interval
which C-RP-Adv messages are sent.
Use the undo c-rp advertisement-interval
setting.
By default, the C-RP-Adv interval is 60 seconds.
c-rp (PIM view).
# Set the global C-RP-Adv interval to 30 seconds in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-rp advertisement-interval 30
command to configure the interval at
command to restore the default