Apply Ipv6 Next-Hop; Display Ip Ipv6-Prefix - H3C MSR 20-20 Command Reference Manual

80

apply ipv6 next-hop

Syntax
View
Parameters
Description
Examples

display ip ipv6-prefix

Syntax
View
Parameters
Description
IP 6 R
V OUTING
C
ONFIGURATION
apply ipv6 next-hop ipv6-address
undo apply ipv6 next-hop
Routing policy view
ipv6-address: Next hop IPv6 address.
Use the
apply ipv6 next-hop
Use the
undo apply ipv6 next-hop
configuration.
No next hop address is set for IPv6 routing information by default.
Using the apply ipv6 next-hop command to set a next hop when redistributing
routes does not take effect.
# Create routing policy policy1 with node 10, matching mode permit. If a route
matches AS path ACL 1, set next hop 3ff3:506::1 for it.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply ipv6 next-hop 3ffe:506::1
display ip ipv6-prefix [ ipv6-prefix-name ]
Any view
ipv6-prefix-name: IPv6 prefix list name, a string of 1 to 19 characters.
Use the display ip ipv6-prefix
IPv6 prefix list. If no IPv6 prefix list is specified, the statistics of all the IPv6 prefix
lists will be displayed.
P
OLICY
C
OMMANDS
command to apply a next hop to IPv6 routes.
command to remove the clause
command to display the statistics of the specified