Display L2Vpn Ccc-Interface Vc-Type - H3C MSR 20-20 Command Reference Manual

1654 C 97: MPLS L2VPN C
HAPTER

display l2vpn ccc-interface vc-type

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
Remote ccc vc
***Name
Type
State
Intf
In-label
Out-label
Nexthop
Table 427 Description on the fields of the display ccc command
Field
Total ccc vc
Local ccc vc
Remote ccc vc
Name
Type
State
Intf
In-label
Out-label
Nexthop
display l2vpn ccc-interface vc-type { all | bgp-vc | ccc | ldp-vc | static-vc } [ up |
down ]
Any view
all: Specifies interfaces of any encapsulation types.
bgp-vc: Specifies interfaces of Kompella L2VPN VCs.
ccc: Specifies interfaces of CCC L2VPN VCs.
ldp-vc: Specifies interfaces of Martini L2VPN VCs.
static-vc: Specifies interfaces of SVC L2VPN VCs.
up: Specifies CCC interfaces in the state of UP.
down: Specifies CCC interfaces in the state of DOWN.
Use the display l2vpn ccc-interface vc-type
about specified L2VPN VC interfaces.
# Display information about interfaces of any encapsulation types.
<Sysname> display l2vpn ccc-interface vc-type all
Total ccc-interface of CCC VC: 3
: 1, 0 up
: c1
: remote
: down
: Serial2/0 (up)
: 100
: 200
: 20.1.1.1
Description
Total number of CCC connections
Number of local CCC connections
Number of remote CCC connections
Name of the CCC connection
Type of the CCC connection
Status of the CCC connection
Interface of the CCC connection
Incoming label
Outgoing label
IP address of the next hop
command to display information