Filter-Policy Export(Ospfv3 View) - H3C MSR 20-20 Command Reference Manual

filter-policy export(OSPFv3 view)

Syntax
View
Parameters
Description
Hello due in 00:00:02
Adjacency state :Full
Table 315 Description on the fields of the display ospfv3 vlink command
Field
Virtual Link VLINK1 to router 1.1.1.1 is up
Transit area 0.0.0.1 via interface Serial2/0
instance ID
Local address
Remote address
Transmit Delay
State
Timer intervals configured, Hello: 10, Dead: 40,
Wait: 40, Retransmit: 5
Hello due in 00:00:02
Adjacency state
filter-policy { acl-number | ipv6-prefix ipv6-prefix-name } export [ isisv6 process-id |
ospfv3 process-id | ripng process-id | bgp4+ | direct | static]
undo filter-policy export [ isisv6 process-id | ospfv3 process-id | ripng process-id |
bgp4+ | direct | static ]
OSPFv3 view
acl-number: Specifies the ACL number, ranging from 2000 to 3999.
ipv6-prefix ipv6-prefix-name: Specifies the name of an IPv6 prefix list, a string of
up to 19 characters.
isisv6 process-id: Specifies to filter the routes of an IPv6 IS-IS process, which is in
the range of 1 to 65535.
ospfv3 process-id: Specifies to filter the routes of an OSPFv3 process, which is in
the range of 1 to 65535.
ripng process-id: Specifies to filter the routes of a RIPng process, which in the
range of 1 to 65535.
bgp4+: Specifies to filter BGP4+ routes.
direct: Specifies to filter direct routes.
static: Specifies to filter static routes.
Use the filter-policy export
Description
The virtual link VLINK1 to router 1.1.1.1 is
up
Interface Serial 2/0 in transit area 0.0.0.1.
Instance ID
Local IPv6 address
Remote IPv6 address
Transmit delay of sending LSAs
Interface state
Timer intervals in seconds, Hello: 10, Dead:
40, Wait: 40, Retransmit: 5
Send hello packets in 2 seconds.
Adjacency state
command to filter redistributed routes.
1295