Qos Lr (Interface View) - H3C MSR 20-20 Command Reference Manual

1780 C 107: L
HAPTER INE

qos lr (interface view)

Syntax
View
Parameters
Description
Examples
qos lr (layer 2 interface view or port group view)
Syntax
R C C
ATE ONFIGURATION OMMANDS
Table 475 Description on the fields of the display qos lr command
Field
Passed
Delayed
Active Shaping
qos lr outbound cir committed-information-rate [ cbs committed-burst-size [ ebs
excess-burst-size ] ]
undo qos lr { inbound | outbound }
Interface view
outbound: Configures LR for data streams sent by the interface.
cir committed-information-rate: CIR, in the range 8 to 1000000 kbps.
cbs committed-burst-size: CBS, with the default value being the traffic passed at
CIR in 500 milliseconds. If the traffic passed at CIR in 500 milliseconds is lower
than 1875, 1875 is taken as the default value.
ebs excess-burst-size: EBS, i.e. size of the burst traffic exceeding the committed
traffic in dual-token bucket algorithm, in byte. It defaults to 0, that is, only one
token bucket is used for policing.
Use the command to limit the transmitting or receiving rate of the
qos lr
interface.
Use the
undo qos lr
Execute the command in interface view, and the setting is effective on the current
interface only.
# Limit packet-forwarding rate of interface Ethernet1/0 to the normal rate 20
kbps. The CBS value is 2000 bytes and the EBS value is 0.
<Sysname> system-view
[Sysname] interface Ethernet1/0
[Sysname-Ethernet1/0] qos lr outbound cir 20 cbs 2000 ebs 0
qos lr { inbound outbound } cir committed-information-rate [ cbs
committed-burst-size [ ebs excess-burst-size ] ]
undo qos lr { inbound outbound }
Description
Number and byte number of passed packets.
Number and byte number of delayed packets.
Whether the current LR configuration is activated or not.
command to remove the limit.