1084
C
74: IS-IS C
HAPTER
timer isp-generation
Syntax
View
Parameters
Description
C
ONFIGURATION
OMMANDS
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] summary 202.0.0.0 255.0.0.0
timer lsp-generation maximum-interval [ initial-interval [ incremental-interval ] ]
[ level-1 | level-2 ]
undo timer lsp-generation [ level-1 | level-2 ]
IS-IS view
maximum-interval: Maximum interval in seconds for generating ISIS LSPs, in the
range 1 to 120.
initial-interval: Initial interval in milliseconds for generating ISIS LSPs, in the range
10 to 60000. The default is 0.
incremental-interval: Incremental interval (in milliseconds), in the range 10 to
60000. The default is 0.
level-1: Applies the specified intervals to generating level-1 LSPs.
level-2: Applies the specified intervals to generating level-1 LSPs.
Use the
timer lsp-generation
generation.
Use the
undo timer isp-generation
By default, the LSP generation interval is 2 seconds.
n
If only the maximum interval is specified, this maximum interval is the LSP
■
generation interval.
If both the maximum and initial intervals are specified, the system can adjust
■
the LSP generation interval upon topology changes. When the topology is
stable, the initial interval applies as the LSP generation interval. When topology
changes become frequent, the LSP generation interval is the maximum or initial
interval.
If all the maximum, initial and incremental intervals are specified, the system
■
will adjust the LSP generation interval upon topology changes in this way:
when the network changes are infrequent, the initial interval applies as the LSP
generation interval. When the network changes become frequent, the
generation interval changes between the initial and maximum intervals based
on the specified incremental interval.
By using this command to adjust the LSP generation interval, you can save the
bandwidth and router resources that may be wasted due to frequent network
changes.
command to specify intervals for ISIS LSP
command to restore the default.