Mpls Te Cspf; Mpls Te Cspf Timer Failed-Link - H3C MSR 20-20 Command Reference Manual

mpls te cspf

Syntax
View
Parameter
Description
Example

mpls te cspf timer failed-link

Syntax
View
Parameter
Description
Related command:
Example
mpls te cspf
undo mpls te cspf
MPLS view
None
Use the
mpls te cspf
Use the undo mpls te cspf
By default, CSPF is disabled on current node.
Before enabling CSPF, enable MPLS TE in MPLS view.
CSPF provides an approach to path selection in MPLS domains. You must enable
CSPF before configuring other CSPF related functions.
# Enable CSPF.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls te cspf
mpls te cspf timer failed-link timer-interval
undo mpls te cspf timer failed-link
MPLS view
timer-interval: Failed link timer setting, in the range 0 to 300 seconds. The default
is 10 seconds.
Use the
mpls te cspf timer failed-link
timer.
Use the
undo mpls te cspf timer failed-link
mpls te cspf.
# Set the failed link timer to 50 seconds.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls te cspf timer failed-link 50
command to enable CSPF on current node.
command to disable CSPF on current node.
command to configure the failed link
command to restore the default.
1621