Reset Pim Control-Message Counters; Source-Lifetime (Pim View) - H3C MSR 20-20 Command Reference Manual

1422 C 90: PIM C
HAPTER

reset pim control-message counters

Syntax
View
Parameter
Description
Example

source-lifetime (PIM view)

Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION OMMANDS
reset pim [ vpn-instance vpn-instance-name | all-instance ] control-message
counters [ interface interface-type interface-number ]
User view
vpn-instance-name: VPN instance name, a case sensitive string of up to 31
characters.
all-instance: Specifies all VPN instances.
interface interface-type interface-number: Specifies to reset the PIM control
message counter on a particular interface. If no interface is specified, this
command will clear the statistics information of PIM control messages on all
interfaces.
Use the reset pim control-message counters
message counters.
# Reset PIM control message counters on all interfaces in the public instance.
<Sysname> reset pim control-message counters
source-lifetime interval
undo source-lifetime
Public instance PIM view, VPN instance PIM view
interval: Multicast source lifetime in seconds, with an effective range of 1 to
65,535.
Use the
source-lifetime
Use the
undo source-lifetime
By default, the lifetime of a multicast source is 210 seconds.
state-refresh-interval (PIM view).
# Set the multicast source lifetime to 200 seconds in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] source-lifetime 200
command to configure the multicast source lifetime.
command to restore the default setting.
command to reset PIM control