1048
C
74: IS-IS C
HAPTER
Description
Examples
display isis mesh-group
Syntax
View
Parameters
Description
Examples
C
ONFIGURATION
OMMANDS
n
If no level is specified, then both Level-1 and Level-2 (or Level-1-2) link state
databases are displayed by default.
Use the
display isis lsdb
# Display Level-1 LSDB information.
<Sysname> dis isis lsdb level-1
LSPID
--------------------------------------------------------------------------
bbbb.cccc.dddd.00-00* 0x0000001d 0x165
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
Table 237
Description on the fields of the display isis lsdb command
Field
LSPID
Seq Num
Checksum
Holdtime
Length
ATT/P/OL
display isis mesh-group [ process-id | vpn-instance vpn-instance-name ]
Any view
process-id: Specifies an IS-IS process ID, in the range of 1 to 65535.
vpn-instance-name: Specifies a VPN instance name, in the range of 1 to 31
characters.
Use the
display isis mesh-group
# Add the Serial2/0 interface and Serial2/1 interface on a router to mesh-group
100.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] isis mesh-group 100
[Sysname-Serial2/0] quit
[Sysname] interface serial 2/1
[Sysname-Serial2/1] isis mesh-group 100
command to display IS-IS link state database.
Database information for ISIS(1)
--------------------------------
Level-1 Link State Database
Seq Num
Checksum
820
command to display IS-IS mesh-group.
Holdtime
Length
36
1/0/0
Description
Link state packet ID
LSP sequence number
LSP checksum
LSP holdtime
LSP length
Attach bit (ATT)
Partition bit (P)
Overload bit (OL)
ATT/P/OL