Checkzero; Default Cost (Rip View) - H3C MSR 20-20 Command Reference Manual

77

checkzero

Syntax
View
Parameters
Description
Examples

default cost (RIP view)

Syntax
View
Parameters
Description
RIP C
ONFIGURATION
checkzero
undo checkzero
RIP view
None
Use the command to enable the zero field check on RIP-1 messages.
checkzero
Use the
undo checkzero
The zero field check is enabled by default.
After the zero field check is enabled, the router discards RIP-1 messages in which
zero fields are non-zero. If all messages are trusty, you can disable this feature to
spare the processing time of the CPU.
# Disable the zero field check on RIP-1 messages for RIP process 100.
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] undo checkzero
default cost value
undo default cost
RIP view
value: Default metric of redistributed routes, in the range of 0 to 16.
Use the default cost
routes.
Use the undo default cost
command to disable the zero field check.
command to configure the default metric for redistributed
command to restore the default.
C
OMMANDS