Display Ipv6 Policy-Based-Route Setup - H3C MSR 20-20 Command Reference Manual

894 C 69: IP 6 U
HAPTER V

display ipv6 policy-based-route setup

Syntax
View
Parameter
Description
Example
P R C
NICAST OLICY OUTING ONFIGURATION
<Sysname> display ipv6 policy-based-route
Policy Name
pr02
pr02
pr01
Table 193 Description on fields of the display ipv6 policy-based-route command
Field
Local
pr02
Virtual-Template0
Ethernet1/0
display ipv6 policy-based-route setup { policy-name | interface interface-type
interface-number | local }
Any view
policy-name: Policy name, a string of 1 to 19 characters.
interface interface-type interface-number: Displays policy routing information on
the specified interface.
local: Displays system policy routing information.
Use the
display ipv6 policy-based-route setup
IPv6 policy routing configuration information.
# Display specified IPv6 policy routing configuration information.
<Sysname> display ipv6 policy-based-route setup local
Local policy based routing configuration information:
ipv6 policy-based-route : test
Node 6 permit :
if-match acl6 2000
Node 10 permit :
apply destination-based-forwarding
Table 194 Description on fields of the display ipv6 policy-based-route setup command
Field
ipv6 policy-based-route : test
Node 6 permit
if-match acl6 2000
Node 10 permit
apply destination-based-forwarding
C
OMMANDS
interface
local
Virtual-Template0
Ethernet 1/0
Description
System policy routing
Policy name
Policy pr02 applied to Virtual-template0
Policy pr01 applied to Ethernet1/0
command to display specified
Description
Name of the referenced policy
The match mode of Node 6 is permit.
IPv6 packets matching IPv6 ACL 2000
are permitted.
The match mode of Node 10 is permit.
Enable destination based forwarding
for denied IPv6 packets