Display Isis Route - H3C MSR 20-20 Command Reference Manual

1050 C 74: IS-IS C
HAPTER
View
Parameters
Description
Examples

display isis route

Syntax
View
C
ONFIGURATION OMMANDS
Any view
verbose: When this parameter is used, the area address advertised in a neighbor's
Hello packet will be displayed. Otherwise the system displays only the summary
information.
process-id: Specifies an IS-IS process ID, in the range of 1 to 65535.
vpn-instance-name: Specifies a VPN instance name, in the range of 1 to 31
characters.
Use the
display isis peer
Besides all the information displayed using the display isis peer command, the
display isis peer verbose command displays neighbor area address, hold time of
Up state and direct interface's IP address.
# Display detailed IS-IS neighbor information.
<Sysname> display isis peer verbose
System Id: 0000.0000.0003
Interface: Ethernet1/0
State: Up HoldTime: 8s
Area Address(es):10
Peer IP Address(es): 192.168.0.3
Uptime: 00:14:03
Adj Protocol:
Table 239 Description on the fields of the display isis peer command
Field
System Id
Interface
Circuit Id
State
HoldTime
Type
PRI
Area Address(es)
Peer IP Address(es)
Uptime
Adj Protocol
display isis route [ ipv4 ] [ [ level-1 | level-2 ] | verbose ] * [ process-id | vpn-instance
vpn-instance-name ]
Any view
command to display IS-IS neighbor information.
Peer information for ISIS(1)
----------------------------
Circuit Id: 0000.0000.0003.01
Type: L1(L1L2)
IPV4
Description
System ID
Interface connecting to the neighbor
Circuit ID
State
Holdtime
Type of the neighbor
DIS Priority
The neighbor's area address
Interface IP address of the neighbor
Time being up
Adjacency protocol
PRI: 64