Display Pim Claimed-Route - H3C MSR 20-20 Command Reference Manual

display pim claimed-route

Syntax
View
Parameter
Candidate RP: 12.12.12.9(LoopBack1)
Priority: 0
HoldTime: 150
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
Candidate RP: 3.3.3.3(Ethernet1/0)
Priority: 20
HoldTime: 90
Advertisement Interval: 50
Next advertisement scheduled at: 00:00:28
Candidate RP: 5.5.5.5(Ethernet1/1)
Priority: 0
HoldTime: 80
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
Table 335 Description on the fields of the display pim bsr-info command
Field
Elected BSR Address
Candidate BSR Address
Priority
Hash mask length
State
Scope
Uptime
Next BSR message scheduled
at
Candidate RP
Priority
HoldTime
Advertisement Interval
Next advertisement scheduled
at
display pim [ vpn-instance vpn-instance-name | all-instance ] claimed-route
[ source-address ]
Any view
vpn-instance-name: VPN instance name, a case sensitive string of up to 31
characters.
all-instance: Specifies all VPN instances.
source-address: Displays the information of the unicast route to a particular
multicast source. If you do not provide this argument, this command will display
the information about all unicast routes used by PIM.
Description
Address of the elected BSR
Address of the candidate BSR
BSR priority
Hash mask length for RP selection calculation
BSR state
Scope of the BSR
Length of time for which this BSR has been up, in
hours:minutes:seconds
Length of time in which the BSR will expire, in
hours:minutes:seconds
Address of the C-RP
Priority of the C-RP
Timeout time of the C-RP
Interval at which the C-RP sends advertisement messages
Length of time in which the C-RP will send the next
advertisement message, in hours:minutes:seconds
1393